Setting Double Station Electric and Automatic Heat Press

Welcome to Lavoie International for heatpressCanada.com. In this presentation, you will discover how to set up your settings on the digital screen.

 To begin, P1 you input the temperature.

Then, for P 2, you enter the pre-pressing time.

To day, I will press 3 time

First 3sec / 12 sec /and 10 sec to solidify my print

 P 3, you can choose between Celsius or Fahrenheit

 P 4 you input pressure

 P 5 is the standby mode; when you don’t use

 P 6, You can choose mode one or mode two.

 P6-1 In mode one, you can input just one pressing for example 12 seconds,

 Or P6-2 is my example for today you can select different time 3sec/12sec and 10 sec

 Then, you can switch between Manual or Automatic mode with the functions on the side of the machine and control the operation speed from right to left.

 Simply install the yellow pedal that comes with the machine. In Manual mode, you can alternate from right to left by pressing the pedal at the same time to switch from right to left.

Clic here to wacht the video on YouTube